Show simple item record

dc.contributor.advisorHall, Professor Denis R.
dc.contributor.authorEsser, M.J. Daniel
dc.date.accessioned2014-02-18T10:24:24Z
dc.date.available2014-02-18T10:24:24Z
dc.date.issued2010-10
dc.identifier.urihttp://hdl.handle.net/10399/2612
dc.description.abstractThe concept of a diode-end-pumped Tm3+ laser pumping a Ho3+ laser was utilised to develop mid-infrared solid-state laser devices. After presenting an in-depth literature study of the promising material Tm:GdVO4, it was theoretically predicted and experimentally verified that a diode-end-pumped Tm:GdVO4 laser can be operated over a 100 nm wavelength range merely through the appropriate selection of the resonator output coupling value. The output at 1818 nm is the shortest wavelength demonstrated for a multi-watt Tm:GdVO4 laser, while the quasi-continuous-wave output power of 8.7 W at 1915 nm is the highest reported for a diode-end-pumped Tm:GdVO4 laser. A dual-end-pumped Tm:GdVO4 laser operating at 1892 nm was subsequently designed as pump source for a Ho:YLF laser, the implementation of which was demonstrated for the first time. The Q-switched Ho:YLF laser, pumped with a 83 mJ quasi-continuous-wave pulse of 19 ms duration at 5 Hz repetition rate, produced 1.9 mJ in a 17.6 ns pulse at 2051 nm on the π-polarisation, and 2.1 mJ in a 47.7 ns pulse on the σ-polarisation. This initial research work directed the way towards the development of high-energy Ho3+ lasers and amplifiers pumped with alternative high average power Tm3+ laser devices.en_US
dc.publisherHeriot-Watt Universityen_US
dc.publisherEngineering and Physical Sciencesen_US
dc.rightsAll items in ROS are protected by the Creative Commons copyright license (http://creativecommons.org/licenses/by-nc-nd/2.5/scotland/), with some rights reserved.
dc.titleMid-infrared diode-pumped solid-state lasersen_US
dc.typeThesisen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record